OLV78 Acrylic Quick-Drying Sealant

Short Description:

OLV78 Acrylic Quick-Drying Sealant for windows and doors is a one part, water based acrylic sealant that cures to a more flexible and tougher rubber with good adhesion to porous surface without primer. Suitable for sealing and filling gaps or joints where low demands of elongation are required. Resistant to outdoorconditions. Is an economical and ideal sealant to use in static joints of the buildings.

Add: NO.1, AREA A, LONGFU INDUSTRY PARK, LONGFU DA DAO, LONGFU TOWN,SIHUI,GUANGDONG, CHINA

Tel: 0086-20-38850236

Fax: 0086-20-38850478

Send email to us CHAT NOW

Product Detail

Product Tags

Main purposes

1. Mainly for sealing the gaps or joints interior and exterior, such as doors and window frames, walls, window sills, prefab elements, stairs, skirting, corrugated roof sheets, chimneys, conduit-pipes and roof gutters;
2. Can be used on most construction materials, such as brick, concrete, plasterwork, asbestos cement, wood, glass, ceramic tiles, metals, aluminum, zinc and so on.;
3. Acrylic sealant for windows and doors.

Characteristics

1. One part, water based acrylic sealant that cures to a flexible and tough rubber with good adhesion to porous surface without primer;
2. Suitable for sealing and filling gaps or joints where low demands of elongation are required;
3. Can be widely used for sealing gaps and cracks before painting.

Limitations

1. Unsuitable for permanently flexible sealing, for cars or spaces where wet conditions exist, e.g. aquaria, foundations and swimming pools;
2. Do not apply at temperature below 0℃;
3. Be not fit for continuous immersion in water;
4. Keep out of reach of children.
Tips:
The joint surfaces must be clean and free from dust, rust and grease. Tar and bitumen substrates reduce the bonding ability;
In order to improve the bonding ability to strongly absorbing porous surfaces, such as stone, concrete, asbestos cement and plasterwork, these surfaces should first be primed with a diluted sealant (1 volume of Acrylic Sealant to 3-5 volumes of water) until the primer to dry completely.
Shelf life: Acrylic Sealant is sensitive to frost and must be kept in tightly closed packing in a frost-proof place. The shelf life is about 12 months when stored in a cool and dry place.
Standard: JC/T 484-2006
Volume: 300ml

Technical Data Sheet(TDS)

The following data are only for reference purpose, not intended for use in preparing specification.

OLV78 Acrylic Quick-Drying Sealant
Performance	Standard	Measured Value	Testing Method
Appearance	Have no grain no agglomerations	good	GB/T13477
Density (g/cm³)	/	1.39	GB/T13477
Extrusion (ml/min)	＞100	130	GB/T13477
Skin-Free Time (min)	/	5	GB/T13477
Elastic recovery rate (%)	＜40	18	GB/T13477
Fluidity Resistance (mm)	≤3	0	GB/T13477
Elongation of Rupture (%)	＞100	210	GB/T13477
Elongation and Adhesion (Mpa)	0.02~0.15	0.15	GB/T13477
Stability of Low Temperature storage	No caky and isolating	/	GB/T13477
Water resistance at the beginning	No feculent	No feculent	GB/T13477
Pollution	No	No	GB/T13477
Storage	12 Months